Endpoint testing with Jest and Supertest

I played around with testing lately. One thing I tried to do was to test the endpoints of my Express application.
Setting up the test was the hard part. People who write about tests don’t actually teach you how they set it up. I could not find any usef…


This content originally appeared on Zell Liew and was authored by Zell Liew

I played around with testing lately. One thing I tried to do was to test the endpoints of my Express application.

Setting up the test was the hard part. People who write about tests don’t actually teach you how they set it up. I could not find any useful information about this, and I had to try and figure it out.

So today, I want to share the setup I created for myself. Hopefully, this can help you when you create your own tests.

First, let’s talk about the stack.

The Stack

  • I created my app with Express.
  • I used Mongoose to connect to MongoDB
  • I used Jest as my test framework.

You might have expected Express and Mongoose because everyone else seems to use those two frameworks. I used them too.

But why Jest and not other test frameworks?

Why Jest

I don’t like Facebook, so I didn’t want to try anything that was created by Facebook’s team. I know it sounds silly, but that was the truth.

Before Jest, I tried out all sorts of test frameworks. I tried Tap, Tape, Mocha, Jasmine, and AVA. Each test framework has its own pros and cons. I almost ended up with AVA, but I didn’t go with AVA because I found it hard to set up. Eventually, I tried Jest out because Kent C. Dodds recommended it.

I fell in love with Jest after trying it out. I love it because:

  1. It’s easy to setup
  2. The watch-mode is amazing
  3. When you console.log something, it actually shows up without any difficulty (this was a bitch with AVA).

Setting up Jest

First, you need to install Jest.

npm install jest --save-dev

Next, you want to add tests scripts to your package.json file. It helps to add the test and test:watch scripts (for one-off testing and watch-mode respectively).

"scripts": {
  "test": "jest",
  "test:watch": "jest --watch"
},

You can choose to write your test files in one of the following formats. Jest picks them up for you automatically.

  1. js files in the __tests__ folder
  2. files named with test.js (like user.test.js)
  3. files named with spec.js (like user.spec.js)

You can place your files however you like. When I tested endpoints, I put the test files together with my endpoints. I found this easier to manage.

- routes
  |- users/
    |- index.js
    |- users.test.js

Writing your first test

Jest includes describe, it and expect for you in every test file. You don’t have to require them.

  • describe lets you wrap many tests together under one umbrella. (It is used for organizing your tests).
  • it lets you run a test.
  • expect lets you perform assertions. The test passes if all assertions passes.

Here’s an example of a test that fails. In this example, I expect that 1 should be strictly equal to 2. Since 1 !== 2, the test fails.

// This test fails because 1 !== 2
it('Testing to see if Jest works', () => {
  expect(1).toBe(2)
})

You’ll see a failing message from Jest if you run Jest.

npm run test:watch
Output from Terminal. Test fails.

You can make the test pass by expecting 1 === 1.

// This passes because 1 === 1
it('Testing to see if Jest works', () => {
  expect(1).toBe(1)
})
Output from Terminal. Test successful.

This is the most basic of tests. It’s not useful at all because we haven’t tested anything real yet.

Asynchronous tests

You need to send a request to test an endpoint. Requests are asynchronous, which means you must be able to conduct asynchronous tests.

This is easy with Jest. There are two steps:

  1. Add the async keyword
  2. Call done when you’re done with your tests

Here’s what it can look like:

it('Async test', async done => {
  // Do your async tests here
  
  done()
})

Note: Here’s an article on Async/await in JavaScript if you don’t know how to use it.

Testing Endpoints

You can use Supertest to test endpoints. First, you need to install Supertest.

npm install supertest --save-dev

Before you can test endpoints, you need to setup the server so Supertest can use it in your tests.

Most tutorials teach you to listen to the Express app in the server file, like this:

const express = require('express')
const app = express()

// Middlewares...
// Routes...

app.listen(3000)

This doesn’t work because it starts listening to one port. If you try to write many test files, you’ll get an error that says “port in use”.

You want to allow each test file to start a server on their own. To do this, you need to export app without listening to it.

// server.js
const express = require('express')
const app = express()

// Middlewares...
// Routes...

module.exports = app

For development or production purposes, you can listen to your app like normal in a different file like start.js.

// start.js
const app = require('./server.js')
app.listen(3000)

Using Supertest

To use Supertest, you require your app and supertest in the test file.

const app = require('./server') // Link to your server file
const supertest = require('supertest')
const request = supertest(app)

Once you do this, you get the ability to send GET, POST, PUT, PATCH and DELETE requests. Before we send a request, we need to have an endpoint. Let’s say we have a /test endpoint.

app.get('/test', async (req, res) => {
  res.json({message: 'pass!'})
})

To send a GET request to /test, you use the .get method from Supertest.

it('Gets the test endpoint', async done => {
  // Sends GET Request to /test endpoint
  const res = await request.get('/test')

  // ...
  done()
})

Supertest gives you a response from the endpoint. You can test both HTTP status and the body (whatever you send through res.json) like this:

it('gets the test endpoint', async done => {
  const response = await request.get('/test')

  expect(response.status).toBe(200)
  expect(response.body.message).toBe('pass!')
  done()
})
First endpoint test passes.

If you want to find out more about Supertest, you can read its documentation here.

In the next article, I’ll show you how to do a POST request and how to connect to Mongoose in your test file.


This content originally appeared on Zell Liew and was authored by Zell Liew


Print Share Comment Cite Upload Translate Updates
APA

Zell Liew | Sciencx (2019-08-07T00:00:00+00:00) Endpoint testing with Jest and Supertest. Retrieved from https://www.scien.cx/2019/08/07/endpoint-testing-with-jest-and-supertest/

MLA
" » Endpoint testing with Jest and Supertest." Zell Liew | Sciencx - Wednesday August 7, 2019, https://www.scien.cx/2019/08/07/endpoint-testing-with-jest-and-supertest/
HARVARD
Zell Liew | Sciencx Wednesday August 7, 2019 » Endpoint testing with Jest and Supertest., viewed ,<https://www.scien.cx/2019/08/07/endpoint-testing-with-jest-and-supertest/>
VANCOUVER
Zell Liew | Sciencx - » Endpoint testing with Jest and Supertest. [Internet]. [Accessed ]. Available from: https://www.scien.cx/2019/08/07/endpoint-testing-with-jest-and-supertest/
CHICAGO
" » Endpoint testing with Jest and Supertest." Zell Liew | Sciencx - Accessed . https://www.scien.cx/2019/08/07/endpoint-testing-with-jest-and-supertest/
IEEE
" » Endpoint testing with Jest and Supertest." Zell Liew | Sciencx [Online]. Available: https://www.scien.cx/2019/08/07/endpoint-testing-with-jest-and-supertest/. [Accessed: ]
rf:citation
» Endpoint testing with Jest and Supertest | Zell Liew | Sciencx | https://www.scien.cx/2019/08/07/endpoint-testing-with-jest-and-supertest/ |

Please log in to upload a file.




There are no updates yet.
Click the Upload button above to add an update.

You must be logged in to translate posts. Please log in or register.