Unblocking clipboard access

Over the past few years, browsers have used
for clipboard interactions. Though widely supported, this method of cutting and
pasting came at a cost: clipboard access was synchronous, and could only read
and write to the DOM.

This content originally appeared on web.dev and was authored by Jason Miller

Over the past few years, browsers have used document.execCommand() for clipboard interactions. Though widely supported, this method of cutting and pasting came at a cost: clipboard access was synchronous, and could only read and write to the DOM.

That's fine for small bits of text, but there are many cases where blocking the page for clipboard transfer is a poor experience. Time consuming sanitization or image decoding might be needed before content can be safely pasted. The browser may need to load or inline linked resources from a pasted document. That would block the page while waiting on the disk or network. Imagine adding permissions into the mix, requiring that the browser block the page while requesting clipboard access. At the same time, the permissions put in place around document.execCommand() for clipboard interaction are loosely defined and vary between browsers.

The Async Clipboard API addresses these issues, providing a well-defined permissions model that doesn't block the page. Safari recently announced support for it in version 13.1. With that, major browsers have a basic level of support in place. As of this writing, Firefox only supports text; and image support is limited to PNGs in some browsers. If you're interested in using the API, consult a browser support table before proceeding.

The Async Clipboard API is limited to handling text and images. Chrome 84 introduces an experimental feature that allows the clipboard to handle any arbitrary data type.

Copy: writing data to the clipboard


To copy text to the clipboard call writeText(). Since this API is asynchronous, the writeText() function returns a Promise that resolves or rejects depending on whether the passed text is copied successfully:

async function copyPageUrl() {
try {
await navigator.clipboard.writeText(location.href);
console.log('Page URL copied to clipboard');
} catch (err) {
console.error('Failed to copy: ', err);


Actually, writeText() is just a convenience method for the generic write() method, which also lets you copy images to the clipboard. Like writeText(), it is asynchronous and returns a Promise.

To write an image to the clipboard, you need the image as a blob. One way to do this is by requesting the image from a server using fetch(), then calling blob() on the response.

Requesting an image from the server may not be desirable or possible for a variety of reasons. Fortunately, you can also draw the image to a canvas and call the canvas' toBlob() method.

Next, pass an array of ClipboardItem objects as a parameter to the write() method. Currently you can only pass one image at a time, but we hope to add support for multiple images in the future. ClipboardItem takes an object with the MIME type of the image as the key and the blob as the value. For Blob objects obtained from fetch() or canvas.toBlob(), the blob.type property automatically contains the correct MIME type for an image.

try {
const imgURL = '/images/generic/file.png';
const data = await fetch(imgURL);
const blob = await data.blob();
await navigator.clipboard.write([
new ClipboardItem({
[blob.type]: blob
console.log('Image copied.');
} catch (err) {
console.error(err.name, err.message);

The copy event

In the case where a user initiates a clipboard copy, non-textual data is provided as a Blob for you. The copy event includes a clipboardData property with the items already in the right format, eliminating the need to manually create a Blob. Call preventDefault() to prevent the default behavior in favor of your own logic, then copy contents to the clipboard. What's not covered in this example is how to fall back to earlier APIs when the Clipboard API isn't supported. I'll cover that under Feature detection, later in this article.

document.addEventListener('copy', async (e) => {
try {
let clipboardItems = [];
for (const item of e.clipboardData.items) {
if (!item.type.startsWith('image/')) {
new ClipboardItem({
[item.type]: item,
await navigator.clipboard.write(clipboardItems);
console.log('Image copied.');
} catch (err) {
console.error(err.name, err.message);

Paste: reading data from clipboard


To read text from the clipboard, call navigator.clipboard.readText() and wait for the returned Promise to resolve:

async function getClipboardContents() {
try {
const text = await navigator.clipboard.readText();
console.log('Pasted content: ', text);
} catch (err) {
console.error('Failed to read clipboard contents: ', err);


The navigator.clipboard.read() method is also asynchronous and returns a Promise. To read an image from the clipboard, obtain a list of ClipboardItem objects, then iterate over them.

Each ClipboardItem can hold its contents in different types, so you'll need to iterate over the list of types, again using a for...of loop. For each type, call the getType() method with the current type as an argument to obtain the corresponding Blob. As before, this code is not tied to images, and will work with other future file types.

async function getClipboardContents() {
try {
const clipboardItems = await navigator.clipboard.read();
for (const clipboardItem of clipboardItems) {
for (const type of clipboardItem.types) {
const blob = await clipboardItem.getType(type);
} catch (err) {
console.error(err.name, err.message);

The paste event

As noted before, there are plans to introduce events to work with the Clipboard API, but for now you can use the existing paste event. It works nicely with the new asynchronous methods for reading clipboard text. As with the copy event, don't forget to call preventDefault().

document.addEventListener('paste', async (e) => {
const text = await navigator.clipboard.readText();
console.log('Pasted text: ', text);

As with the copy event, falling back to earlier APIs when the Clipboard API isn't supported will be covered under Feature detection.

Handling multiple file types

Most implementations put multiple data formats on the clipboard for a single cut or copy operation. There are two reasons for this: as an app developer, you have no way of knowing the capabilities of the app that a user wants to copy text or images to, and many applications support pasting structured data as plain text. This is presented to users with an Edit menu item with a name such as Paste and match style or Paste without formatting.

The following example shows how to do this. This example uses fetch() to obtain image data, but it could also come from a <canvas> or the File System Access API.

function copy() {
const image = await fetch('kitten.png');
const text = new Blob(['Cute sleeping kitten'], {type: 'text/plain'});
const item = new ClipboardItem({
'text/plain': text,
'image/png': image
await navigator.clipboard.write([item]);

Security and permissions

Clipboard access has always presented a security concern for browsers. Without proper permissions, a page could silently copy all manner of malicious content to a user's clipboard that would produce catastrophic results when pasted. Imagine a web page that silently copies rm -rf / or a decompression bomb image to your clipboard.

Browser prompt asking the user for the clipboard permission.
The permission prompt for the Clipboard API.

Giving web pages unfettered read access to the clipboard is even more troublesome. Users routinely copy sensitive information like passwords and personal details to the clipboard, which could then be read by any page without the user's knowledge.

As with many new APIs, the Clipboard API is only supported for pages served over HTTPS. To help prevent abuse, clipboard access is only allowed when a page is the active tab. Pages in active tabs can write to the clipboard without requesting permission, but reading from the clipboard always requires permission.

Permissions for copy and paste have been added to the Permissions API. The clipboard-write permission is granted automatically to pages when they are the active tab. The clipboard-read permission must be requested, which you can do by trying to read data from the clipboard. The code below shows the latter:

const queryOpts = { name: 'clipboard-read', allowWithoutGesture: false };
const permissionStatus = await navigator.permissions.query(queryOpts);
// Will be 'granted', 'denied' or 'prompt':

// Listen for changes to the permission state
permissionStatus.onchange = () => {

You can also control whether a user gesture is required to invoke cutting or pasting using the allowWithoutGesture option. The default for this value varies by browser, so you should always include it.

Here's where the asynchronous nature of the Clipboard API really comes in handy: attempting to read or write clipboard data automatically prompts the user for permission if it hasn't already been granted. Since the API is promise-based, this is completely transparent, and a user denying clipboard permission causes the promise to reject so the page can respond appropriately.

Because Chrome only allows clipboard access when a page is the active tab, you'll find that some of the examples here don't run if pasted directly into DevTools, since DevTools itself is the active tab. There's a trick: defer clipboard access using setTimeout(), then quickly click inside the page to focus it before the functions are called:

setTimeout(async () => {
const text = await navigator.clipboard.readText();
}, 2000);

Permissions policy integration

To use the API in iframes, you need to enable it with Permissions Policy, which defines a mechanism that allows for selectively enabling and disabling various browser features and APIs. Concretely, you need to pass either or both of clipboard-read or clipboard-write, depending on the needs of your app.

allow="clipboard-read; clipboard-write"


Feature detection

To use the Async Clipboard API while supporting all browsers, test for navigator.clipboard and fall back to earlier methods. For example, here's how you might implement pasting to include other browsers.

document.addEventListener('paste', async (e) => {
let text;
if (navigator.clipboard) {
text = await navigator.clipboard.readText();
else {
text = e.clipboardData.getData('text/plain');
console.log('Got pasted text: ', text);

That's not the whole story. Before the Async Clipboard API, there were a mix of different copy and paste implementations across web browsers. In most browsers, the browser's own copy and paste can be triggered using document.execCommand('copy') and document.execCommand('paste'). If the text to be copied is a string not present in the DOM, it must be injected into the DOM and selected:

button.addEventListener('click', (e) => {
const input = document.createElement('input');
input.value = text;
const result = document.execCommand('copy');
if (result === 'unsuccessful') {
console.error('Failed to copy text.');

In Internet Explorer, you can also access the clipboard through window.clipboardData. If accessed within a user gesture such as a click event—part of asking permission responsibly—no permissions prompt is shown.


You can play with the Async Clipboard API in the demos below or directly on Glitch.

The first example demonstrates moving text on and off the clipboard.

To try the API with images use this demo. Recall that only PNGs are supported and only in [a few browsers](https://developer.mozilla.org/en-US/docs/Web/API/Clipboard_API.

Next Steps

Chrome is actively working on expanding the Asynchronous Clipboard API with simplified events aligned with the Drag and Drop API. Because of potential risks Chrome is treading carefully. To stay up to date on Chrome's progress, watch this article and our blog for updates.

For now, support for the Clipboard API is available in a number of browsers.

Happy copying and pasting!


The Asynchronous Clipboard API was implemented by Darwin Huang and Gary Kačmarčík. Darwin also provided the demo. Thanks to Kyarik and again Gary Kačmarčík for reviewing parts of this article.

Hero image by Markus Winkler on Unsplash.

This content originally appeared on web.dev and was authored by Jason Miller

Print Share Comment Cite Upload Translate Updates

Jason Miller | Sciencx (2020-07-31T00:00:00+00:00) Unblocking clipboard access. Retrieved from https://www.scien.cx/2020/07/31/unblocking-clipboard-access/

" » Unblocking clipboard access." Jason Miller | Sciencx - Friday July 31, 2020, https://www.scien.cx/2020/07/31/unblocking-clipboard-access/
Jason Miller | Sciencx Friday July 31, 2020 » Unblocking clipboard access., viewed ,<https://www.scien.cx/2020/07/31/unblocking-clipboard-access/>
Jason Miller | Sciencx - » Unblocking clipboard access. [Internet]. [Accessed ]. Available from: https://www.scien.cx/2020/07/31/unblocking-clipboard-access/
" » Unblocking clipboard access." Jason Miller | Sciencx - Accessed . https://www.scien.cx/2020/07/31/unblocking-clipboard-access/
" » Unblocking clipboard access." Jason Miller | Sciencx [Online]. Available: https://www.scien.cx/2020/07/31/unblocking-clipboard-access/. [Accessed: ]
» Unblocking clipboard access | Jason Miller | Sciencx | https://www.scien.cx/2020/07/31/unblocking-clipboard-access/ |

Please log in to upload a file.

There are no updates yet.
Click the Upload button above to add an update.

You must be logged in to translate posts. Please log in or register.